The display measures 6.7 inches and uses an AMOLED panel with a 120Hz refresh rate. You don’t get LTPO, though, and you can set it to run at 60Hz only, 120Hz, or a dynamic refresh rate that ranges from 60Hz to 120Hz, depending on what you’re doing. The resolution is 1080 x 2412 pixels, and the pixel density is 394 ppi pixels per inch. The display’s peak brightness is 1,300 nits, and it peaks at 1,100 nits outdoors. There’s also a fingerprint scanner underneath the display for quick authentication.
Setting the refresh rate
The Nothing Phone 2a camera system is different taiwan telegram data in two ways: its design and placement make it feel like you have two robot eyes looking at you, and it only has two rear cameras. This approach is refreshing because often on affordable smartphones, the third camera is not that great and is practically unusable. In contrast, Nothing has decided to include two perfectly usable cameras:
The main 50-megapixel camera has an f1.88 aperture, 2x optical zoom, autofocus, and optical image stabilization.
Secondary 50MP wide-angle camera with f2.2 aperture and 114° field of view FOV.
The front-facing selfie camera on the phone has a 32MP resolution and an f2.2 aperture. This phone can record video at 4K resolution at 30 frames per second fps, 1080p at 30 or 60 fps, and 120 fps when using slow-motion.