Method 7: Modify the Shell Hardware Detection Service
Posted: Wed Feb 12, 2025 5:52 am
1. Press Windows + R , type services.msc and press Enter .
Services.msc
2. In the Services tool, locate and double-click the Shell Hardware Detection service .
Shell Hardware Detection Service
3. Select Automatic from the Startup type drop-down menu.
Set Automatic
4. Click " Start " if the service is not running and click " Apply ".
Start > Apply
5. Click OK and close the Services bangladesh telegram data application.
Method 8: Reset startup settings
1. Open Control Panel and search for Startup Settings . Then select the result.
2. Scroll down the AutoPlay page and click " Reset all settings to default ".
Reset all settings to default
Method 9: Modify Local Group Policy Editor
1. Open the Run window, type " gpedit.msc" and click " OK ".
2. Navigate to Computer Configuration > Administrative Templates > Windows Components > Autoplay Policies.
3. Double-click the Disable AutoPlay policy to open it.
Services.msc
2. In the Services tool, locate and double-click the Shell Hardware Detection service .
Shell Hardware Detection Service
3. Select Automatic from the Startup type drop-down menu.
Set Automatic
4. Click " Start " if the service is not running and click " Apply ".
Start > Apply
5. Click OK and close the Services bangladesh telegram data application.
Method 8: Reset startup settings
1. Open Control Panel and search for Startup Settings . Then select the result.
2. Scroll down the AutoPlay page and click " Reset all settings to default ".
Reset all settings to default
Method 9: Modify Local Group Policy Editor
1. Open the Run window, type " gpedit.msc" and click " OK ".
2. Navigate to Computer Configuration > Administrative Templates > Windows Components > Autoplay Policies.
3. Double-click the Disable AutoPlay policy to open it.